Ubiquiti (UA-G2) Ubiquiti UniFi Access Reader G2, Entry/Exit Messages, IP55 Weather Resistance, Additional Handwave Unlock Functionality, 2Yr Warr

Write a Review
SKU:
UA-G2
MPN:
UAG2
Availability:
In Stock
Shipping:
Calculated at Checkout
MSRP: $306.90
$288.38
Inc. GST
MSRP: $279.00
$262.16
Ex. GST
— You save $18.52

Frequently bought together:

Description

Product Description

Compact, second-generation NFC card reader and request-to-exit device that supports hand-wave door unlocking.

security Unlock using an NFC card or UniFi Identity mobile app

doors Additional handwave unlock functionality

human Entry and exit greeting messages

door_hub Connects to UniFi Access Hub using PoE

waterdrop IP55 weather resistance (-30 to 45° C)

BlackBlackWhiteWhite

Technical Details

Mechanical
Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
Weight 82 g (2.9 oz)
Enclosure material Polycarbonate, glass
Mounting In wall, gang box
Weatherproofing IP55
Hardware
Networking interface (1) 10/100 MbE RJ45 port
Connectivity BLE 4.1
Power method PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range 48V DC
Max. power consumption 5W
ESD/EMP protection Air: ±15kV, contact: ±8kV
Sensors Proximity sensor
Speaker (1) 8 ohm, 0.7W
LEDs R/G/B/W
Button (1) Factory-reset
NFC frequency 13.56 MHz
NFC read range < 30 mm
NFC standards ISO 14443A, 14443B, 15693
NFC technology NFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFire
Operating environment Outdoor use
Ambient operating temperature -30 to 45° C (-22 to 113° F)
Ambient operating humidity 5 to 90% noncondensing
Software information The software version of a product can be checked at https://unifi.ui.com
UL 294 level Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I
UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade Grade assignment: I
Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level UA-G2/UA-G2-Black, V02
LED
System Steady blue: Adopted/device is readySteady white: Pending adoptionBlinking white/blue: Upgrading firmwareStrobing red: Emergency lockdown
Software
Management application UniFi Access: Version 1.5.9 and later

Deplyment

Access Reader G2

Build Features

Access Reader G2

Whats in the Box

Access Reader G2

Installation Guide

Download Installation Guide

View AllClose