Ubiquiti
Ubiquiti (UA-SK-Elevator) Ubiquiti Elevator Starter Kit, PoE++ , Up/Down/Stop/Full/Door Open, Close/5 Car Position,1 Emergency, Floor Selection Up18 flooors, 2Yr Warr
- SKU:
- UA-SK-Elevator
- MPN:
- UASKElevator
- Availability:
- Please contact us for availability
Frequently bought together:
Description
Product Video
Product Description
Connects to in-elevator readers using PoE to authorize user's floor selection. Support for up to 18 floors and digital inputs for car status and emergency.
(1) Elevator Hub
(1) G2 Reader
(2) 2-wire PoE extenders
(10) Access Cards
Technical Details
Technical Specifications
| UA-Hub-ElevatorMechanical | |
|---|---|
| Dimensions | 129.3 x 244.7 x 33.6 mm (5.1 x 9.6 x 1.3") |
| Weight | 537 g (1.2 lb) |
| Enclosure material | Polycarbonate |
| Mounting material | Polycarbonate |
| Hardware | |
| Networking interface | (4) 10/100/1000 Base-T |
| Management interface | (1) 10/100/1000 Base-T |
| Power method | PoE++ |
| Max. power consumption | 7W (Without PoE output) |
| PoE input | (1) PoE++, 50V DC, 1.2A |
| PoE output | PoE passthrough, (4) PoE, 50V DC, total 42W |
| ESD/EMP protection | Air: ±8kV, contact: ±4kV |
| Digital input | (5) Car position(6) Car status; Up/down/stop/full/door open/door close(1) Emergency |
| Outputs | (18) RelaysRating 30V DC/2A |
| LEDs | System: white/blue/redOutput relays: white |
| Buttons | (1) Factory-resetTerminal blocks |
| Ambient operating temperature | -10 to 40° C (14 to 104° F) |
| Ambient operating humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC, IC |
| UACC-Extender-2Wire-Tx/RxMechanical | |
| Dimensions | 40 x 105 x 25 mm (1.6 x 4.1 x 1") |
| Weight | PoE in: 77 g (2.7 oz)PoE out: 79 g (2.8 oz) |
| Enclosure material | Polycarbonate |
| Mounting material | Polycarbonate |
| Hardware | |
| Networking interface | (1) 10/100 MbE(1) Homeplug AV |
| Management interface | (1) 10/100 MbE |
| Power method | PoE++ |
| Max. power consumption | 3W (Without PoE output) |
| PoE input | (1) PoE++, 50V DC, Max. 1.2A |
| PoE output | (1) PoE+, 48V DC, 0.72A |
| ESD/EMP protection | Air: ±8kV, contact: ±4kV |
| LED | White |
| Ambient operating temperature | -10 to 40° C (14 to 104° F) |
| Ambient operating humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC, IC |
| UA-G2Mechanical | |
| Dimensions | 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") |
| Weight | 82 g (2.9 oz) |
| Enclosure material | Polycarbonate, glass |
| Mounting | In wall, gang box |
| Weatherproofing | IP55 |
| Hardware | |
| Networking interface | (1) 10/100 MbE RJ45 port |
| Connectivity | BLE 4.1 |
| Power method | PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU |
| Supported voltage range | 48V DC |
| Max. power consumption | 5W |
| ESD/EMP protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor |
| Speaker | (1) 8 ohm, 0.7W |
| LEDs | R/G/B/W |
| Button | (1) Factory-reset |
| NFC frequency | 13.56 MHz |
| NFC read range | < 30 mm |
| NFC standards | ISO 14443A, 14443B, 15693 |
| NFC technology | NFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFire |
| Operating environment | Outdoor use |
| Ambient operating temperature | -30 to 45° C (-22 to 113° F) |
| Ambient operating humidity | 5 to 90% noncondensing |
| Software information | The software version of a product can be checked at https://unifi.ui.com |
| UL 294 level | Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I |
| UL 294 statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| PoE cabling requirements | Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number, and issue date and/or revision level | UA-G2/UA-G2-Black, V02 |
| LED | |
| System | Steady blue: Adopted/device is readySteady white: Pending adoptionBlinking white/blue: Upgrading firmwareStrobing red: Emergency lockdown |
| UA-CardMechanical | |
| Dimensions | 85.6 x 54 x 0.8 mm (3.4 x 2.1 x 0.03") |
| Weight | 5 g (0.18 oz) |
| Format | ISO 7810 ID-1 |
| NFC frequency | 13.56 MHz |
| NFC technology | ISO/IEC 14443 Type AMIFARE DESFireUniFi Access Proprietary Security Protocol |
Deplyment
Build Features
Installation Guide
Related Products
Ubiquiti (UA-G2-SK) Ubiquiti UniFi Access Gen 2 Starter Kit - UniFi Dream Machine Pro required, 2Yr Warr
Ubiquiti
MSRP:
$691.90
$632.69
Inc. GST
MSRP:
$629.00
$575.17
Ex. GST
Product Description A quick start for Access with all you need for one door with one reader.
Ubiquiti (UA-Rescue) Ubiquiti Access Rescue KeySwitch, UA-Rescue, Keyed Emergency Override for your Access Hub (UA-HUB), 2Yr Warr
Ubiquiti
MSRP:
$175.11
$168.04
Inc. GST
MSRP:
$159.19
$152.76
Ex. GST
Product Description Keyed emergency override for your Access Hub. Manual unlock port with two physical keys included
Ubiquiti (POE-50-60W) Ubiquiti PoE++ Adapter, 50V 60W airFiber POE, Compatible with UA Hub, Camera G4 PTZ, and Other PoE++ Devices, 2Yr Warr
Ubiquiti
$121.00
Inc. GST
$110.00
Ex. GST
Ubiquiti (UA-SK-Gate) Ubiquiti Gate Access Starter Kit, Control Vehicle Gate by Connect Intercom & Authorize Gate access License Plate Unlock, PoE++, 50V DC, 1A,2Yr Warr
Ubiquiti
MSRP:
$1,659.90
$1,506.71
Inc. GST
MSRP:
$1,509.00
$1,369.74
Ex. GST
Ubiquiti (UA-G2-SK-Pro) Ubiquiti UniFi Access Gen 2 Pro Starter Kit - Comprehensive UniFi Access Starter Kit - UniFi Dream Machine Pro required, 2Yr Warr
Ubiquiti
MSRP:
$1,417.90
$1,282.05
Inc. GST
MSRP:
$1,289.00
$1,165.50
Ex. GST