Ubiquiti (Wave-AP) Ubiquiti Wave AP, 60 GHz 5.4 Gbps Max Access Point, 2.7 Gbps duplex, 30° Sector Coverage, Integrated GPS & Bluetooth, 2Yr Warr

Write a Review
SKU:
Wave-AP
MPN:
WaveAP
Availability:
In Stock
Shipping:
Calculated at Checkout
MSRP: $1,175.90
$1,076.92
Inc. GST
MSRP: $1,069.00
$979.02
Ex. GST
— You save $98.98

Frequently bought together:

Description

Product Description

60 GHz PtMP access point powered by Wave Technology.

5ghz_radio Max. throughput: 5.4 Gbps (2.7 Gbps duplex)

range 30° sector coverage

radios 5 GHz weatherproof backup radio (Max. throughput: 800 Mbps)

wired_plug (1) 2.5 GbE and (1) 10G SFP+ WAN ports

connection 24* client capacity:- Wave Pro (8 km link range)- Wave Long-Range (8 km link range)- Wave Nano (5 km link range)- Wave Pico (1.3 km link range)

locate Integrated GPS & Bluetooth

*FW version 3.3.0 and later.

Technical Details

Mechanical
Dimensions 212 x 205 x 187 mm (8.3 x 8.1 x 7.4")
Weight 2.3 kg (5.1 lb)
Enclosure material Aluminum alloy, UV stabilized polycarbonate
Pole mount diameter 25 to 76 mm (1 to 3") on pipe outer diameter
Wind loading 98 N at 200 km/h (22 lbf at 125 mph)
Weatherproofing IPX6
Hardware
Processor Quad-core ARM® Cortex®-A53 at 1.4 GHz
Memory DDR3L 512 MB
Networking interface (1) 2.5GbE RJ45 port (100/1000/2500)*(1) 10G SFP+ port (1/10)* Active only when SFP+ port is down.
Max. power consumption 24W
Power method Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)Passive PoE 2-pairs (4, 5+; 7, 8-), for 44-54V DC only
Power supply 48V DC, 0.65A 2.5GbE PoE adapter (Included)
Supported voltage range 44-54V DC22-27V DC
GPS Yes
Button Factory reset
LEDs Power, Ethernet, GPS
Ambient operating temperature -40 to 60° C (-40 to 140° F)
Ambient operating humidity 5 to 95% noncondensing
Certifications FCC, IC, CE
Software
Operating mode PtMP access point
Ubiquiti specific features Wave technology
Services UISP, ping watchdog, NTP client, SNMP
Tools Antenna alignment, discovery utility, ping, trace route, speed test, cable test*, site survey**FW version 3.3.0 and later.
Network Bridge mode
Application requirements UISP: Version 1.5.7 and later
System
Total throughput 5.4 Gbps (2.7 Gbps duplex)
Supported clients count 24**FW version 3.3.0 and later.
Max. range Connecting to a Wave Pro: up to 8 kmConnecting to a Wave Long-Range: up to 8 kmConnecting to a Wave Nano: up to 5 kmConnecting to a Wave Pico: up to 1.3 km
Encryption WPA2-PSK (AES)
RF
Operating frequency* 57-71 GHz*Depends on regulatory region.
Channel bandwidth 2160, 1080, 540* MHz*FW version 3.3.0 and later.
Operating channels* 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz*Depends on regulatory region.
Modulation 16QAM, QPSK
Antenna gain 24 dBi
Polarization Vertically linear
Beamwidth Azimuth: 3 dB 30°Elevation: 3 dB 3°
Electrical downtilt
Back-Up RF
WiFi standard 802.11ax (WiFi 6)
Operating frequency*US/CAWorldwide U-NII-1 5150 - 5250 MHzU-NII-2A 5250 - 5350 MHzU-NII-2C 5470 - 5725 MHzU-NII-3 5725 - 5850 MHz5150 - 5875 MHz*Depends on regulatory region.
Channel bandwidth 20, 40, 80 MHz
Modulation BPSK (1?2), QPSK (1?2), QPSK (3?4), 16QAM (1?2), 16QAM (3?4), 64QAM (2?3), 64QAM (3?4), 64QAM (5?6), 256QAM (3?4), 256QAM (5?6), 1024QAM (3?4), 1024QAM (5?6)
Antenna gain 12 dBi
Cross-pol isolation 10 dB
Polarization Dual-linear
Beamwidth Azimuth: 3 dB 35°Elevation: 3 dB 60°
Electric downtilt
LEDs
Power Flashing white: bootup in progressWhite: not connected to UISP applicationBlue: connected to UISP applicationFlashing blue: locate in progressBlue/white: firmware upgrade in progress
Ethernet Flashing white: Ethernet traffic detectedFlashing blue: SFP+ traffic detected
GPS Blue: receiving at least (4) GPS satellite signal

Build Features

Wave Access Point

Installation Guide

Download Installation Guide

View AllClose